Check and seal a tote
Open a waiting tote, scan its contents, and complete the check with the required measurements.
Follow these steps
Choose or scan the tote
Open Check and select a waiting tote, or scan its tote label to open the check.
Scan the contents
Scan each item and compare Expected with scanned on the tote’s lines. Use the camera control or supported hardware scanner.
Complete the check
Tap Complete check and seal. In the completion dialog, enter Actual weight (kg) and Temperature (°C, cold tote) when required.
Seal the tote
Tap Seal tote, read the result, and verify that the tote is ready for the next stage.
Screen guide
Product A
Expected 12 · scanned 122
Where to tap
Active tote
Confirm the intended tote label.
Scan totals
Compare the expected and scanned contents.
Complete check
Open the measurement and seal dialog.
Complete tote check
Where to tap
Actual weight
Enter the measured weight.
Cold tote temperature
Enter the required measured temperature.
Seal tote
Submit the completion operation.
The tote check and seal succeed.